- Rise and fall: 35 mm
- Framework: die-casted aluminium
- Power: 2 kW
- Electronic vectorial inverter
- Supply tension: 230V/50-60Hz singlephase
- Thermal overload safety cut-out
- Operating head: 350 x 550 x 350 mm, 34 kg
- Power unit: 430 x 470 x 230 mm, 18,2 kg
How it works/Applications:
The shaping and polishing process is realized into a number from
5 to 7 phases, according to the kind of material. Thanks to the
adjustable rotation speed and the quality of GHINESTOOLS, achieving
a perfect polishing is fast and easy.
The spindle starts by default at the speed of 3000 rpm, in order
not to compromise the vulcanized wheels with an excessive rotation
The rotation speed can be finely adjusted from 2400
to over 10000 rpm through two buttons marked +/- and is visualized
on the digital tachometer. These features allow to exploit the properties
of every single tool to their maximum: the diamond wheels must operate
at maximum speed to obtain best cutting performances and longer
lifetime; whereas the polishing ones must not exceed 3000-3500 rpm,
according to the kind of material.
This simple process keeps the same schedule and costs
both on “simple” profiles (full bullnose, bird's beck
etc) and on of bigger complexity.
Where to get from?
Giovanni Bavutti- Marketing Manager
Via Ca’ Torsani, 1
47900 RIMINI (RN) Italy
Tel (+39) 0541- 751080
Fax (+39) 0541- 751074.